High Speed Low Static PCB Drilling Spindle 20000 - 200000 rpm KL200P manufacturer from China Conduit Fittings Online Marketplace.

High Speed Low Static PCB Drilling Spindle 20000 - 200000 rpm

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: KL200P

Compatible WWD1822 200,000RPM KL200P1 PCB Drilling Spindle <br

Compatible WWD1822 200,000RPM KL200P1 PCB Drilling Spindle

Quick Detail:

MODEL

REPLACE FOR

DESCRIPTION

KEY PRECISION

Machine reference

KL200P1

D1822

D1686

SPEED RANGE:

20,000 - 200,000 rpm

Ø6.35mm-0.05mm

precision drilling

Static Runout:<2µm

Dynamic Runout:<6µm

Vibration:0.5 MM/S

KLINGINBERG

PLURITEC

HITACHI

LENZ

SCHMOLL

ANDERSON ….

PRODUCT DESCRIPTION

KL200P1 high frequency spindle replace for WW D1822 or For WWD1686 Full Range from 20,000 to 200,000 rpm, air bearing type in long life, spindle weight 3.9kg with COLLET size Ø1/8” and body size Ø 61.9

Max power: 0.85KW
Air Pressure: 6.0 -6.5kgf/cm²
Coolant: Water oil
Fixed voltage: 200V
Fixed current: 3A
FREQUENCY (HZ): 334-3350
PTC or NTC Sensor for choose
Square wave available

Competitive Advantage:

Low Static
Low Dynamic RUN OUT
Stable character and long life
Suitable for precision drilling
Air bearing type offer Greater Precision, High Speed , Increased Tool Life, Improved Surface Finish, Long Bearing Life, Low Thermal Growth, Lack of Maintenance, Large Load Capacity , Reduced Vibration , Cleanliness.

APPLICATION :

PRINT CIRCUIT BOARD PRECISION DRILLING
HOLE RANGE: Ø6.35mm-0.05mm
MACHINE REFERENCE:KLINGINBERG PLURITEC HITACHI LENZ ANDERSON ;SCHMOLL….

SPECIFICATION:

Coolant water temperature	20+2
Static runout	<2µm
Dynamic runout	<6µm
Collet torque(N.cm)	>13( 1/8”)
Vibration	0.5MM/S
Temperature sensor ohms KΩ	R=0.10±5% AT 25
Open air pressure	<5.0kg/cm²
Close air pressure	>2.5 kg/cm²
Coolant water flux	>2.0(L/min)
Coolant oil flux	>3.8(L/min)
Air consume flux at 20krpm	48(L/min)
Radial load	6.0kgf

Compatible D1822 200,000RPM KL200P1 SPINDLE DRAWING

Why choose KLKJ?

With nearly 15 years technology in spindle maintenance, 10 years success experience for spindles parts production, and 9 years spindle R&D, KLKJ succeed in offer air bearing spindle up to 200krpm.

All spindles at the KLKJ are fully checked and tested using stringent quality control procedures. KLKJ ensures every repaired spindle passes the following points to make it in long life and stable character:

1. Air flow

2. Water flow

3. End float/lift off

4. Axial load (inner)

5. Axial load (outer)

6. Torque

7. Static RUNOUT

8. Dynamic RUNOUT

9. Motor check

10. Vibration

11. Material analysis & strictly quality test detection control

12. Stringent tolerance control